The J&M TIDAS L 570 UV/NIR 1911 DH Integrated Diode Array UV/VIS/NIR Spectrometer is specifically designed for pharmaceutical quality control (QC/QA), drug research and development laboratories (R&D), online dissolution monitoring, and process analysis technology (PAT). The equipment integrates a highly stable 35W deuterium lamp and an 8.95W halogen dual-light source system, a 1024-pixel high-sensitivity diode array detector, and an embedded industrial computer touch system in a robust and compact body. It can analyze the full spectrum absorption information of various active pharmaceutical ingredients (APIs), liquid preparations, dissolved samples, and chemical reactions in a completely non-destructive, non-invasive, and highly reproducible manner in real time. This equipment fully complies with the pharmacopoeia standards of various countries such as USP <857> and EP <2.2.25>. It can completely eliminate the errors caused by the time-consuming scanning and mechanical wear of traditional mechanical spectrophotometers. It is an indispensable core tool for dynamic monitoring of solid preparation dissolution, reaction kinetic analysis and immediate release inspection.

I. The integrated industrial touch architecture occupies only 47 x 37 cm, with a built-in 10.4-inch touch screen, Win 10 industrial computer and TIDASDAQ 3 software, and can be tested immediately upon power-on without the need for an external host.

II. Wideband dual-source optical engine integrates a 35W deuterium lamp and an 8.95W halogen lamp, providing full-band scanning from 190 to 1000 nm with a resolution of < 3 nm and wavelength reproducibility of < 0.01 nm.

III. The high-sensitivity diode array detector features a 1024-pixel diode array and a 16-bit converter, achieving a signal-to-noise ratio of up to 10,000:1 and supporting millisecond-level full-spectrum synchronous acquisition.

IV. Standard fiber coupling, PAT linkage and regulatory compliance: Features dual SMA 905 fiber interfaces, Gigabit networking and 2 IN/2 OUT digital I/O, compliant with FDA 21 CFR Part 11 and provides original manufacturer IQ/OQ validation.

Equipment Introduction

• Integrated Compact Architecture & Touchscreen IPC Control

  • Embedded IPC & Intuitive 10.4" Touchscreen GUI : The device directly integrates a 10.4-inch high-resolution color touchscreen, a Windows 10 industrial PC (IPC), and a 64 GB high-speed SSD. It also features built-in TIDASDAQ 3 spectral analysis software, which can run tests independently upon startup, instantly draw full spectrum diagrams, and store data, completely eliminating the need for external computers and cumbersome cabling.

  • Compact Benchtop Footprint & Plug-and-Play : The base measures only about 47 x 37 cm and the entire unit weighs about 12 kg. It features a high-strength, anti-interference casing that can be easily placed on a standard laboratory table, ventilation cabinet, or production line inspection station. It also supports a wide voltage input range of 85–265 VAC, providing excellent spatial flexibility and environmental adaptability.

• Wide-Range Dual Light Source & High-Precision Optical Engine

  • Integrated Deuterium & Halogen Dual Light Sources : The instrument precisely integrates a 35W deuterium lamp and an 8.95W halogen lamp, providing a complete spectral measurement range covering 190–1000 nm (deep ultraviolet to near-infrared), offering flat and stable broadband energy output and ultra-low baseline drift (0.5 mAU/h @ 250 nm).

  • Superior Spectral Resolution & Wavelength Accuracy : The optical system provides spectral resolution < 3 nm (FWHM), wavelength accuracy up to ±0.5 nm, wavelength reproducibility < 0.01 nm, and absorbance accuracy ±10 mAU, enabling precise resolution of sample fine absorption peaks and characteristic spectral profiles.

• High-Sensitivity 1024-Pixel Diode Array & Rapid Acquisition

  • 1024-Pixel Diode Array Detector (SNR >10,000:1) : Equipped with a high-performance 1024-pixel diode array and a 16-bit A/D analog-to-digital converter, it boasts a signal-to-noise ratio of >10,000:1 and a photometric linearity of <1%, providing exceptional weak signal capture capabilities and a wide dynamic measurement range.

  • Millisecond Full-Spectrum Acquisition & Dynamic Kinetics : Without any mechanical spectroscopic rotation structure, it supports millisecond-level ultra-fast full-band synchronous spectral acquisition, and is particularly suitable for in-situ dissolution monitoring, chemical reaction kinetics analysis, and dynamic process analysis (PAT) technology.

• Versatile Fiber Coupling, PAT Integration & Regulatory Compliance

  • Standard Dual SMA 905 Fiber Interface & Digital I/O : Equipped with dual standard SMA 905 fiber connectors (lighting and signal reception), it can seamlessly connect to external immersion probes, ATR attenuated total reflection probes, flow cells, or reflection probes; it features 2 IN / 2 OUT digital I/O and Gigabit Ethernet, easily integrating with automated production lines and PLC control.

  • Fully compliant with Data Integrity and Pharmacopeia Compliance : Fully compliant with FDA 21 CFR Part 11, EU GMP Annex 11, and ALCOA+ data integrity principles, with multi-level access control and complete audit trail; optical performance fully compliant with USP <857> and EP <2.2.25> UV/Vis spectrophotometry specifications, and comes with complete original manufacturer IQ/OQ validation documentation.